Airkos Main Filter - CR7050
Unsure? Get in touch...
We are always happy to help. If you have any questions or can't find what you are looking for just give us a call on 01375 800761 or email us at sales@toolweld.co.uk
Get an Additional Discount!
Simply use the code WELD5 at the checkout to get even more savings when you spend £250 or more...
Replacement Main Filter (CR-2B01/2013) for Airkos Blower Unit
Filter should be fully covered by the pre-filter (CR7060) and should not exceed 180 hours operational use.
Removing the Filter
Opening the filter cover: Grip the cover on the right hand side and pull the cover open. ATTENTION! It is strictly forbidden to use any tools to open the filter cover.
To remove the filter, pull it off the filter seal while rotating it. Clean the unit from dust.
Fitting a new Filter
Inserting a new filter: Put the filter back into position using the same rotating motion and gently push until it fits well on the body of the unit.
Re fitting the Cover; follow the alignment as per the pictures. Ensure the filter clips enter the Blower body, then rotate Clockwise until closed. Do not attempt to use the blower unit without the cover fitted correctly.
Changing the Pre Filter
The pre filter is a sleeve which is fitted over the main filter. To remove / replace simply pull off the old filter and stretch the new one into position. It's important to ensure that the filter media of the main filter is completely covered by the pre filter
